Talk to us?

Monel 400 Flanges

Monel 400 Flanges

Metal Yard is one of the renowned manufacturers and suppliers of Monel 400 Flanges, which is attacked in sulfur-bearing gases above approximately 700 Degree F and molten sulfur attacks the alloy at temperatures over approximately 500 Degree F. Attempts to produce fractures in the torsion specimens by reducing the minimum area by 75% were not successful because of the toughness of Monel 400 Pipe Flanges. In seabird research, and bird banding or ringing in particular, Monel 400 Slip On Flanges has been used to make bird bands or rings for many species such as albatross that live in a corrosive sea water environment. Forging of Monel 400 Weld Neck Flanges is to be done by controlled procedures, where aerated solutions and higher temperature increase the corrosion rate. Monel 400 Blind Flanges containing about 30 to 33 percent of copper in a nickel matrix has many similar characteristics of commercially pure nickel, while improving upon many others. Like with commercially pure Nickel, Monel 400 Socket Weld Flanges is low in strength in the annealed condition, for this reason a variety of tempers are used to achieve higher strength levels.

Monel 400 Threaded Flanges can be cold rolled to various tempers, which is also non-hardenable by heat treatment. Monel 400 Orifice Flanges is additionally utilised in producing varied heaters together with De-aerating heaters, Boiler feed water heaters, and Industrial heat exchangers. We are highly known for our outstanding services in Monel 400 Ring Type Joint Flanges that we provide to all our customers. Buy Alloy 400 Flanges at reasonable rates from us.

ASTM B564 Monel 400 Industrial Flanges Specification

Size : 1/8″ – 4″

Specifications : ASTM / ASME SB 564 / 160 / 472

Standards : ASTM, ASME Flanges, ANSI Flanges, DIN Flanges, EN Flanges, BS Flanges etc.

Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

Pressure Ratings : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64

Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Grade : Monel 400 (UNS No. N04400)

400 Monel Flanges Equivalent Grades
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe
Monel 400 Pipe Flanges Chemical Composition
Grade C Mn Si Cu S Ti Ni Al Fe
Monel 400 0.3 max 2.0 max 0.5 max 28.0 – 34.0 0.02 max - 63.0 min 0.50 max 1.0 – 2.5
Monel 400 Plate Flanges Mechanical & Physical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 35000 , MPa – 240 40 %
Monel 400 Flanges Other Available Products

Monel 400 Flanges

Monel 400 Slip On Flanges

UNS N04400 Monel Loose Flanges

400 Monel Long Weld Neck Flanges Suppliers

Monel 400 Industrial Flanges Dealer

Alloy 400 Ring Type Joint Flanges Stockholder

Monel 400 Orifice Flanges

DIN 2.4360 Monel WNRF Flanges

Monel 400 Alloy SORF Flanges

400 Monel Screwed Flanges

ASTM B564 Monel 400 Plate Flanges

Monel 400 Socket Weld Flanges

Monel 400 Blind Flanges

400 Monel Weld Neck Flanges

400 Monel Threaded Flanges

Monel 400 Reducing Flanges Exporter

Alloy 400 Monel Forged Flanges Distributors

Monel 400 Spactical Blind Flanges Manufacturer

400 Monel RTJ Flanges

Monel 400 Alloy SWRF Flanges

400 Monel BLRF Flanges Stockist

ASME SB564 Monel 400 Pipe Flanges

People Also Searched for Monel 400 Flanges

monel 400 flanges, monel 400 pipe flanges, monel 400 slip on flanges, monel 400 weld neck flanges, monel 400 blind flanges, monel 400 socket weld flanges, monel 400 threaded flanges, monel 400 orifice flanges, monel 400 ring type joint flanges, alloy 400 flanges supplier & exporter in mumbai india, astm b564 monel 400 weld neck flanges, monel din 2.4360 blind flanges, monel uns n04400 sorf flanges, monel alloy 400 slip on flanges, asme 16.47 series b monel 400 alloy flanges, monel alloy uns n05500 orifice flanges, monel 400 threaded flanges, ansi b16.5 alloy 400 flanges, monel din 2.4375 forged flanges, alloy k500 reducing flanges, standard size steel monel alloy 400 rtj flanges, (astm b564, asme sb564) manufacturer & stockist in mumbai, india.

We are Experts in Exporting Monel 400 Flanges worldwide

We are Exporter of Monel 400 Flanges in Worldwide Such as India, France, Costa Rica, Russia, Nepal, Jordan, Taiwan, Puerto Rico, Malaysia, Algeria, Iran, Austria, Norway, Bulgaria, Morocco, Yemen, Mexico, Czech Republic, Indonesia, United Arab Emirates, Singapore, Greece, Trinidad & Tobago,Tunisia, Mongolia, Romania, Oman, Namibia, Lithuania, Denmark, Pakistan, Argentina, Nigeria, Egypt, Israel, Ukraine, Germany, Ghana, Bhutan, South Korea, Macau, Colombia, Angola, Bolivia, United States, South Africa, Chile, China, Slovakia, Netherlands, Hungary, Brazil, New Zealand, Kuwait, Turkey, Bangladesh, Hong Kong, Afghanistan, Nigeria, Ecuador, Azerbaijan, Kenya, Estonia, Vietnam, Australia, Sri Lanka, Thailand, Libya, Iran, Saudi Arabia, Poland, Canada, Gabon, Croatia, Serbia, Venezuela, Bahrain, Chile, Belarus, Sweden, Japan, Lebanon, Philippines, Switzerland, Belgium, Kazakhstan, Ireland, Poland, Finland, Mexico, Qatar, Zimbabwe, Iraq, United Kingdom, Portugal, Spain, Italy, Gambia, Peru, Tibet.

We are Supplier of Monel 400 Flanges in India

We are Suppliers of Monel 400 Flanges in India Such as Mumbai, Coimbatore, Ulsan, Gimhae-si, Doha, Toronto, Port-of-Spain, Lahore, Pune, Haryana, Ludhiana, Mexico City, Secunderabad, Bengaluru, Nagpur, Jeddah, Moscow, Surat, Bogota, Lagos, Sydney, Atyrau, Rio de Janeiro, Baroda, Los Angeles, Geoje-si, Milan, London, Caracas, Kuwait City, Indore, Howrah, Visakhapatnam, Brisbane, Muscat, Thane, Jaipur, Houston, Aberdeen, Calgary, Manama, Kolkata, Dammam, Edmonton, New Delhi, Granada, Petaling Jaya, Rajkot, Seoul, New York, Al Jubail, Hyderabad, Navi Mumbai, Chennai, Faridabad, Hong Kong, Chiyoda, Thiruvananthapuram, Ernakulam, Gurgaon, Bhopal, Busan, Cairo, Ahmedabad, Chandigarh, Vung Tau, Kanpur, Montreal, Noida, Colombo, Riyadh, Santiago, Vadodara, Singapore, Jamshedpur, Karachi, Dubai, Ahvaz, Courbevoie, Kuala Lumpur, La Victoria, Abu Dhabi, Sharjah, Pimpri-Chinchwad, Ankara, Melbourne, Algiers, Istanbul, Ranchi, Perth, Al Khobar, Tehran, Bangkok, Dallas, Jakarta, Nashik, Madrid, Ho Chi Minh City, Hanoi.