Metal Yard is one of the renowned suppliers and manufacturers of Inconel 625 Pipe Flanges, which is an approved material of construction under the Boiler and Pressure Vessel Code of the American Society of Mechanical Engineers (ASME). Alloy 625 Pipe Flanges are often used in applications that run in harsh environment. These are being mainly used in forms of high temp. A twenty-five-minute immersion in a nitric-hydrofluoric bath 145 Degree F (63 Degree C) is necessary in these Inconel 625 Slip On Flanges. Nickel & cobalt base corrosion, temperature and wear-resistant alloys, such as Inconel 625 Threaded Flanges, are classified as moderate to difficult when machining. However, Inconel 625 Weld Neck Flanges should be emphasized that these alloys can be machined using conventional production methods at satisfactory rates. In order to restore the best balance of properties in Inconel 625 Ring Type Joint Flanges, all hot or cold worked parts should be annealed and rapidly cooled. Inconel 625 Orifice Flanges form a disk-shaped morphology and are coherent with respect to the matrix.
Inconel 625 Spectacle Flanges is used before welding, remove scale, grease, mark and imprint, and no heat treatment needed before and after welding. Under strict conditions, Inconel 625 Lap Joint Flanges exhibits excellent corrosion resistance in a wide variety of media. When heated to high temperature, these Inconel 625 Groove and Tongue Flanges form a thick oxide layer that guards its surface from excessive heat. Buy Alloy 625 Flanges at reasonable rates from us.
Size : ½” to 36″
Specifications : ASTM B 564 / ASME SB 564
Standards : ASTM, ASME Flanges, ANSI Flanges, DIN Flanges, EN Flanges, BS Flanges etc.
Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Ratings : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4M | NiCr22Mo9Nb | ЭИ602 |
Grade | C | Mn | Si | P | S | Ni | Cr | Fe | Mo | Co | Al | Ti | Nb + Ta |
Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 0.015 max | 0.015 max | 58.0 min | 20.0 – 23.0 | 5.0 max | 8.0 – 10.0 | 1.0 max | 0.40 max | 0.40 max | 3.15 – 4.15 |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 135,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Inconel 625 Flanges
Inconel 625 Slip On Flanges
UNS N06600, N06601 Inconel Loose Flanges
625 Inconel Long Weld Neck Flanges Suppliers
Inconel 625 Industrial Flanges Dealer
Alloy 625 Ring Type Joint Flanges Stockholder
Inconel UNS N06625, N07718 Orifice Flanges
DIN 2.4816, 2.4851 Inconel WNRF Flanges
Inconel 625 SORF Flanges
ASTM B564 Inconel 625 Flanges
625 Inconel Screwed Flanges
ASTM B564 Inconel 625 Plate Flanges
Inconel 625 Flanges
Inconel 625 Blind Flanges
625 Inconel Weld Neck Flanges
625 Inconel Threaded Flanges
Inconel 625 Reducing Flanges Exporter
Alloy 625 Inconel Forged Flanges Distributors
Inconel 625 Spactical Blind Flanges Manufacturer
DIN 2.4856, 2.4668 Inconel RTJ Flanges
Inconel 625 SWRF Flanges
Inconel Screwed Flanges
625 Inconel BLRF Flanges Stockist
ASME SB564 Inconel 625 Pipe Flanges
inconel 625 pipe flanges, alloy 625 pipe flanges, inconel 625 slip on flanges, inconel 625 threaded flanges, inconel 625 weld neck flanges, inconel 625 ring type joint flanges, inconel 625 orifice flanges, inconel 625 spectacle flanges, inconel 625 lap joint flanges, inconel 625 groove and tongue flanges, alloy 625 flanges supplier & exporter in mumbai india, astm b564 alloy 625 weld neck flanges, asme 16.47 series b 625 alloy flanges, inconel 625 slip on flanges, inconel alloy uns n06625 sorf flanges, inconel alloy 625 orifice flanges, inconel din 2.4856 blind flanges, inconel alloy 625 forged flanges, alloy 625 reducing flanges, ansi b16.5 inconel alloy 625 flanges, inconel 625 threaded flanges, astm b564 inconel 625 flanges, standard size steel inconel alloy 625 rtj flanges, (astm b564, asme sb564) manufacturer & stockist in mumbai, india.
We are Exporter of Inconel 625 Flanges in Worldwide Such as India, Thailand, Lebanon, France, Egypt, Ecuador, Azerbaijan, Colombia, Zimbabwe, Japan, Indonesia, Macau, Hungary, Belarus, United States, Chile, Netherlands, Lithuania, Spain, Norway, Mexico, Gabon, Iran, Serbia, Argentina, Czech Republic, Yemen, Saudi Arabia, Trinidad & Tobago,Tunisia, Slovakia, Algeria, Iran, Poland, Romania, Greece, Ukraine, China, Vietnam, Kenya, Peru, Philippines, Sweden, Namibia, Singapore, Brazil, Portugal, Bulgaria, Chile, Bolivia, Russia, Bangladesh, Libya, Hong Kong, Puerto Rico, Mexico, Denmark, Poland, Nigeria, Oman, Ireland, Nepal, Israel, Ghana, Venezuela, Switzerland, Austria, Pakistan, United Arab Emirates, Costa Rica, New Zealand, South Korea, Nigeria, Jordan, Kuwait, South Africa, Turkey, Bahrain, Tibet, Finland, Afghanistan, Kazakhstan, Gambia, Malaysia, United Kingdom, Bhutan, Italy, Estonia, Australia, Canada, Taiwan, Mongolia, Morocco, Belgium, Croatia, Iraq, Germany, Sri Lanka, Angola, Qatar.
We are Suppliers of Inconel 625 Flanges in India Such as Mumbai, Faridabad, Courbevoie, Montreal, Ranchi, Dammam, Santiago, Muscat, Aberdeen, Calgary, Hyderabad, New Delhi, Noida, Ulsan, Mexico City, Petaling Jaya, Al Jubail, Gurgaon, Kanpur, Thane, Seoul, Dubai, London, Atyrau, Jakarta, Rio de Janeiro, Howrah, Perth, Manama, Busan, Geoje-si, Riyadh, Nagpur, Karachi, Tehran, Navi Mumbai, Ahmedabad, Ahvaz, Al Khobar, Dallas, Algiers, Kuwait City, Madrid, Rajkot, Port-of-Spain, Istanbul, Moscow, Bangkok, Brisbane, Lagos, Sydney, Vadodara, Milan, Chandigarh, Abu Dhabi, Pimpri-Chinchwad, Kuala Lumpur, Pune, Bogota, Granada, Hanoi, Secunderabad, Baroda, Ernakulam, Gimhae-si, Bhopal, Edmonton, Houston, Lahore, Caracas, Chiyoda, Visakhapatnam, Ho Chi Minh City, Thiruvananthapuram, Coimbatore, Melbourne, Surat, Singapore, Los Angeles, Indore, Ankara, Doha, Hong Kong, Nashik, La Victoria, Cairo, Jamshedpur, Jaipur, Chennai, Sharjah, Kolkata, Vung Tau, Colombo, Ludhiana, Haryana, Bengaluru, Toronto, Jeddah, New York.
Copyright © 2017 Metal Yard - Designed & Developed by www.rathinfotech.com